Speed control peristaltic pump, timing function, timing quantitative addition, stepper motor drive, 128 times subdivision, low vibration, but also very quiet, and the circuit board is still three anti-paint treatment, many industries with liquid transmission needs, will want to understand the advantages and disadvantages of speed control peristaltic pump, want to know whether it is suitable for their own industry, the next peristaltic pump manufacturers small series to share with you.

1, no pollution

Because of the unique operating characteristics of the speed-adjusting peristaltic pump, only the pump pipe contacts the stock liquid, so the transmission process is safe and pollution-free.

2, simple operation

Compared with some other pumps, the operation of the peristaltic pump is very simple, only need to install the pump head and pump tube, and then you can run.

3. Scope of application

Because the material of the peristaltic pump tube is diverse, the applicable industry is also very wide, the transmitted liquid or corrosion, or more viscous, etc., can match the suitable hose.

4, high stability

For industries that require stable transmission of stock liquid, peristaltic pumps are the first choice, such as cosmetics, pharmaceutical liquids, etc., all choose peristaltic pumps.

5, high precision

Precision peristaltic pump has a certain degree of transmission accuracy, which is very suitable for the industry of filling in batches, such as the nucleic acid reagent industry uses a filling peristaltic pump, of course, if you have high requirements for accuracy, it is still more recommended here.

6. Dry operation

The speed regulating peristaltic pump can carry out dry operation to avoid accidents in production.

7, easy to clean

The stock solution only contacts the hose, so when cleaning, you only need to clean or replace the pump tube, and the operation is very simple.

The following is the shortcomings of the speed control peristaltic pump, after all, no matter how good the product, there are certainly insufficient places, can not meet the needs of all people.

1. There is pulse

In the transmission process of the speed control peristaltic pump, because the hose is alternately squeezed and released by the roller, so the liquid is a stream of outflow, even after the double roller pulsation reduction, it is difficult to completely avoid, so if you can not tolerate the transmission of the liquid will have a little bit of pulsation, the peristaltic pump is not suitable.

2. Hose wear

During the operation of the speed control peristaltic pump, the hose is continuously squeezed by the roller, so the wear of the hose is unavoidable, and the hose needs to be replaced regularly. Of course, compared with other pump maintenance methods, the use of peristaltic pump is relatively simple.